Asphalt in a Bag Products

The patented formulation combines crushed recycled asphalt, a co-polymer binder and water. The binder coats the aggregate at factory temperature and stays workable in the bag through 12 months of shelf life. When compacted, the binder activates and creates a permanent structural bond to the surrounding pavement.

The use of recycled asphalt as the aggregate fraction means each bag diverts old pavement from landfill — sustainable repair without compromise on durability.

The bag itself is the supply unit, the storage unit and the application unit. No transfer, no decanting, no on-site mixing. A single operator handles 15 or 20 kg comfortably and applies directly from the bag into the void.

That logistics simplicity is the practical reason bagged cold-mix has displaced kettle-truck hot-mix for repair work across most of Australia.

Asphalt in a Bag is available in 5, 7, 10 and 14 mm aggregate grades — match the gauge to the repair depth and traffic load. Same binder chemistry across all grades; different aggregate for different jobs.

One 20 kg bag covers approximately 0.5 square metres at 22 mm thickness. A typical 300 × 300 × 50 mm pothole takes about one 20 kg bag including overfill. Stock 5–10 bags for a small commercial site, a pallet (~50 bags) for fleet or council use.