Use case

Driveway Pothole Repair Products

Driveway potholes are a common DIY repair — a fine-grade cold-mix from a 15 or 20 kg bag, a hand tamp, and a Saturday morning. Done correctly, the patch lasts as long as the rest of the driveway and matches the visual finish closely enough that you stop noticing it within a few weeks.

Road Solutions AUS supplies the cold-mix products homeowners and small contractors actually want for driveway work — fine aggregate, smooth finish, permanent bond, no specialist equipment.

Key facts

Recommended grade
5 Gauge Mix (fine) or 7 Gauge (general)
Pack size
15 or 20 kg bag / bucket
Tools needed
Broom, tamp or vehicle tyre
Cure
Drive on immediately
Coverage
~0.5 m² per 20 kg at 22 mm
Finish
Tight, smooth, blends with asphalt

Which grade for a driveway

5 Gauge Mix is the right product for most driveway repairs. The fine 5 mm aggregate and high fines content give a smooth visual finish that blends with the surrounding asphalt. For larger or deeper driveway failures, 7 Gauge gives more structural strength with a slightly coarser finish.

Either grade is permanent and trafficable immediately after compaction.

Step-by-step driveway repair

A typical driveway pothole takes about 15 minutes end to end. Sweep the void clean of loose material. Pour the cold-mix from the bag into the hole, overfilling by about 10 mm. Compact with a hand tamp, or drive a car tyre back and forth across the patch a few times until it's flush with the surrounding surface.

Park the car on the patch overnight if you want extra compaction. Done — no cure delay, no special tools.

How much do I need

A 20 kg bag covers about 0.5 square metres at 22 mm thickness. A typical 30 × 30 cm driveway pothole 50 mm deep takes about one 20 kg bag including overfill. Larger driveway repairs scale up linearly — two bags for double the area or depth.

Buy one bag for a small repair, a few bags for a larger driveway resurface, or a bucket for ongoing maintenance with a resealable lid.

Avoid the cheap throw-and-go alternative

Hardware-store throw-and-go cold patch is tempting but typically a low-grade emulsion product that ravels out within a season. You'll re-patch the same driveway hole every year. Permanent cold-mix from Road Solutions AUS costs a small premium per bag and lasts as long as the driveway.

Most homeowners report buying one bag of the real product after one bag of the cheap product fails — go straight to the permanent material.

Frequently asked

Common questions

Talk to an asphalt specialist today

Volume pricing, freight quotes Australia-wide, and product advice from people who use this gear every day. Call 1300 789 967 or request a quote online.