Asphalt In a Bag Australia

Asphalt in Bags is a kind of hot machined bituminous concrete that is available for purchase in ready-to-use bags of the material. The polymers and additives that are included inside this product are what cause the process of asphalt’s hardening to take longer than it would otherwise. In other words, unlike traditional asphalt, asphalt that is sold in a bag does not need to be prepared in advance, nor does its application require any heavy or specialised machinery; rather, it can be applied directly from its packaging to the area that needs to be repaired.

This is in contrast to traditional asphalt, which does require preparation in advance and does require heavy or specialised machinery. The asphalt that is supplied in bags is more compact than the typical asphalt, which allows for this to be a possibility. When compared to the traditional asphalt, this is a significant advantage.

In the repair of asphalt pavements that have been worn down through time or as a consequence of excessive traffic, one major usage for asphalt that has been packed in bags is found in the repair of asphalt pavements. The production rate is five bags per square metre when the material is spread out over an area of one square metre and is five centimetres thick throughout.

What are the advantages of bagged asphalt compared to traditional asphalt?

Because Asphalt in Bags may be used to its full potential, there is no opportunity for material waste or loss to occur. In contrast to this, ordinary asphalt is produced with an allowance for some of the material to be lost during the manufacturing process. Asphalt that is sold in bags is ready to use right out of the package, in contrast to regular asphalt, which has to be mixed and so on.

After the asphalt has been packed into a bag and compacted, the area may then be immediately opened up to foot and vehicle traffic. The kind of asphalt that is sold in bags, on the other hand, may be used in any kind of climate; nevertheless, it is recommended that the area where it will be applied be dry. On the other hand, the application of traditional asphalt may only take place when it is not raining, and the area in question must be completely dry.

How to apply asphalt in a bag?

• Disaggregate – The region that will be applied should be delimited and disaggregated.
• Fill – Asphalt should be spread all around the area.
• Compact – It is essential to compress the product in order to ensure that it will stick to the ground and will not get dislodged.

Ready to use in any situation

This ready-to-use pre-mix bituminous combination is produced by combining selected aggregates, bitumen, and a co-polymer to provide a durable bonding solution suitable for long-term applications and repairs. The road repair technology known as asphalt in a Bag may be used in any climate.

Road Solutions AUS is a manufacturer and distributor of asphalt and bitumen repair products for projects such as road resurfacing, utility cuts, driveway repairs, and pothole repairs.

The use of Asphalt in A Bag will help you to finish your asphalt and bitumen repair projects seamlessly.